Location:Home > News
News
Metal Ti Sintered Porous Filter Cartridge

Source:https://www.ti-frit.com/news/914.html    Time:2022-01-14    Hits:15

1

Metal Ti Sintered Porous Filter Cartridge Technical Data

Raw Material: Ti

Filter Rating Range: 0.22 Micron ~ 100 Microns

Filter Efficiency: > 99.99 %

Operation Temperature:  300 

Outside Diameter: 12 mm, 25 mm, 30 mm, 50 mm, 60 mm, 65 mm, 70 mm, 80 mm, 90 mm, 100 mm

Length: 5'' (127 mm), 10'' (254 mm), 20'' (508 mm), 30'' (762 mm), 40'' (1016 mm) or others  

Gasket: PTFE, Viton, Silicone, Buna-n, EPDM

Connector/Fitting/Adaptor:

1. DOE

2. Code 2 (226+Flat End)

3. Code 3 (222+Flat End)

4. Code 7 (226+Fin End)

5. Code 8 (222+Fin End)

6. Thread (NPT,BSP,G,M,R)

7. Flange

8. Special customization


Metal_Ti_Sintered_Porous_Filter_Cartridge.jpg


Metal Ti Sintered Porous Filter Cartridge Feature

1. Metal ti sintered porous filter cartridge is made from ti powder particle

2. Metal ti sintered porous filter cartridge is sintered in a high temperature vacuum furnace

3. Metal ti sintered porous filter cartridge is depth filtration

4. Metal ti sintered porous filter cartridge is suitable for food industry and medicine industry (GMP) because ti is an in-noxious metal and an inert metal

5. Metal ti sintered porous filter cartridge is backwash

6. High corrosion resistance

7. High porosity

8. High mechanical strength

9. High filter efficiency

10. High dirt holding capacity

11. High flow rate at low differential pressure

12. High temperature resistance

13. Washable and Cleanable

14. Reusable

15. Long service life


Application

1. Steam filtration (aseptic package, breweries, chemicals, dairies, electronics, food and beverage, pharmaceuticals, plastic)

2. High temperature gases filtration (highly aggressive gases, nitrogen, carbon dioxide, compressed air, tank ventilation)

3. High temperature liquid filtration (chemicals, cosmetics, paints, salt and seawater, syrups, coolants, food and beverage, pharmaceuticals, solvents, water)

4. Catalysts powders recovery

5. Precoat support filtration


ZWEN Quality Guarantee

1. We can provide raw material test report

2. We can provide filter efficiency test report

3. We will pay 2 times price for clients if SGS test report shows bad quality (we only accept SGS test report)


About Us

XINXIANG ZWEN FILTER CO.,LTD produces metal ti sintered porous filter cartridge, metal ti sintered porous filter disc, metal ti sintered porous filter disk, metal ti sintered porous filter element, metal ti sintered porous filter pipe, metal ti sintered porous filter plate, metal ti sintered porous filter rod, metal ti sintered porous filter sheet, and metal ti sintered porous filter tube.


XINXIANG ZWEN FILTER CO.,LTD has advanced sintering equipment, advanced welding equipment and a high level of skilled workers.


XINXIANG ZWEN FILTER CO.,LTD has passed ISO 9001:2008 quality management system and SGS audit test. 


XINXIANG ZWEN FILTER CO.,LTD main markets are European market and North American market.


XINXIANG ZWEN FILTER CO.,LTD Key Clients: 3M, BOEING, GKN, MAHLE, Parker, SIEMENS.


Contact Us

XINXIANG ZWEN FILTER CO.,LTD

HEAD OFFICE: NO.728, 7TH FLOOR, JINGYE INTERNATIONAL, NORTHEAST CORNER, INTERSECTION OF JINSUI AVENUE AND XINER STREET, HONGQI DISTRICT, XINXIANG CITY, HENAN PROVINCE, CHINA

FACTORY ADDRESS: NO.425, XINHUI ROAD, MUYE DISTRICT, XINXIANG CITY, HENAN PROVINCE, CHINA

TEL: +86-373-5807218

FAX: +86-373-5895995

EMAIL: info@zwenfilter.com

WEBSITE: www.zwenfilter.com

WEBSITE: www.leerfilter.com             

WEBSITE: www.ti-frit.com

WEBSITE: www.ti-filter.com

WEBSITE: www.titanium-frit.com

WEBSITE: www.titanium-filter.com

WEBSITE: www.metal-sintered-filter.com

WEBSITE: www.sintered-porous-filter.com

WEBSITE: www.pleated-stainless-steel-filter-element.com

WEBSITE: www.pleated-stainless-steel-filter-cartridge.com